Prusament PETG Anthracite Grey 1kg
About PETG Carbon Fiber
Prusament PETG Carbon Fiber is a classic Prusament PETG filament reinforced with carbon fiber which improves some of its mechanical properties and gives it an attractive look. Compared to regular Prusament PETG, this material has better dimensional stability, better temperature resistance, higher modulus of elasticity, and is less prone to stringing. With Prusament PETG Carbon Fiber, you get very durable, professional-looking prints. The carbon fibers inside the filament are obtained by recycling industrial waste form the production process or carbon composites at the end of their life.
Printing Setup
Nozzle 265±10 °C
Heatbed 90±10 °C
Recommended Steel Sheet Textured / Satin
Basic Attributes
+High strength and durability
+Improved temperature resistance
+Improved dimensional stability during printing
+Higher resistance to being deformed elastically
+Low stringing
+Visually appealing surface
+Easy to print
+Almost odorless when printing
-Lower toughness compared to Prusament PETG
-Requires a hardened nozzle
Beginners tips & tricks
Make sure you print Prusament PETG Carbon Fiber with a hardened nozzle. Carbon fibers inside are highly abrasive and may damage a regular brass nozzle.
Notes
This PETG Carbon Fiber was made in-house at Prusa Research.
This 1.75mm filament has a manufacturing tolerance of ± 0.02mm.
Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.
To dry the filament, please follow the instructions.
About PETG Carbon Fiber
Prusament PETG Carbon Fiber is a classic Prusament PETG filament reinforced with carbon fiber which improves some of its mechanical properties and gives it an attractive look. Compared to regular Prusament PETG, this material has better dimensional stability, better temperature resistance, higher modulus of elasticity, and is less prone to stringing. With Prusament PETG Carbon Fiber, you get very durable, professional-looking prints. The carbon fibers inside the filament are obtained by recycling industrial waste form the production process or carbon composites at the end of their life.
Printing Setup
Nozzle 265±10 °C
Heatbed 90±10 °C
Recommended Steel Sheet Textured / Satin
Basic Attributes
+High strength and durability
+Improved temperature resistance
+Improved dimensional stability during printing
+Higher resistance to being deformed elastically
+Low stringing
+Visually appealing surface
+Easy to print
+Almost odorless when printing
-Lower toughness compared to Prusament PETG
-Requires a hardened nozzle
Beginners tips & tricks
Make sure you print Prusament PETG Carbon Fiber with a hardened nozzle. Carbon fibers inside are highly abrasive and may damage a regular brass nozzle.
Notes
This PETG Carbon Fiber was made in-house at Prusa Research.
This 1.75mm filament has a manufacturing tolerance of ± 0.02mm.
Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.
To dry the filament, please follow the instructions.
About PETG Carbon Fiber
Prusament PETG Carbon Fiber is a classic Prusament PETG filament reinforced with carbon fiber which improves some of its mechanical properties and gives it an attractive look. Compared to regular Prusament PETG, this material has better dimensional stability, better temperature resistance, higher modulus of elasticity, and is less prone to stringing. With Prusament PETG Carbon Fiber, you get very durable, professional-looking prints. The carbon fibers inside the filament are obtained by recycling industrial waste form the production process or carbon composites at the end of their life.
Printing Setup
Nozzle 265±10 °C
Heatbed 90±10 °C
Recommended Steel Sheet Textured / Satin
Basic Attributes
+High strength and durability
+Improved temperature resistance
+Improved dimensional stability during printing
+Higher resistance to being deformed elastically
+Low stringing
+Visually appealing surface
+Easy to print
+Almost odorless when printing
-Lower toughness compared to Prusament PETG
-Requires a hardened nozzle
Beginners tips & tricks
Make sure you print Prusament PETG Carbon Fiber with a hardened nozzle. Carbon fibers inside are highly abrasive and may damage a regular brass nozzle.
Notes
This PETG Carbon Fiber was made in-house at Prusa Research.
This 1.75mm filament has a manufacturing tolerance of ± 0.02mm.
Before printing, make sure the surface of heatbed is clean as described in 3D Printing Handbook.
To dry the filament, please follow the instructions.
